| Yokohama Fender | Fuel Dispenser |Hex Bolts | cylinder liner | Injection Mould | Candle Holder | Plastic Cup | Polycarbonate Sheet | Solar Charger | Wind Turbine | Steel Door | Knife Gate Valve plastic cutting board | Boss Factory Blog

Archive for the Category » plastic cutting board «

Caring For Your Cutting Board

Researchers have found that bacteria have a tougher time surviving on wood cutting boards. However, plastic cutting boards are less porous than wood, making it less likely to harbor bacteria over a long period of time, but only if it is immediately cleaned. Here are a few tips to caring for your cutting board.

cutting board

1. It is best to apply the oil slightly warm and with a soft cloth in the direction on the grain. Warming the oil allows it to penetrate deeper into the wood. “Season” your board by applying mineral or butcher block oil and letting it soak into the wood for 15-30 minutes. Apply 4-6 coats before using the board.

2. Oil your plastic cutting board when it looks dry, sometimes as frequently as once a week. If you allow your board to become dry it may begin to crack.

3. Scrub and wash your cutting board with soap and water but don’t immerse it completely in water. In addition, don’t put your wooden cutting board in the dishwasher because it will warp the wood.

4. Spraying vinegar on your cutting board with a spray bottle is a good way to sanitize it. Using bleach on a wood cutting board isn’t a good idea because it is not as effective because the organic composition of wood neutralizes the disinfectant quality of bleach.

Category: plastic cutting board  Tags:  Comments off

Caring For Your Teak Cutting Board

When it comes to caring for teak cutting boards, a few simple steps can extend the life of your board exponentially. Teak’s naturally occurring oils help the wood resist moisture, rot, fungi, and warping, but with a little extra love you can keep your beautiful teak plastic food cutting boards looking great indefinitely.

First and foremost, the most important way to add additional protection to your plantation teak cutting board is to season the surface with a liberal dose of the proper oil. This oil fills in the wood’s tiny pores and creates a barrier that keeps food particles and liquids from penetrating into deep into the grain.

Materials

Most teak experts recommend a USP grade mineral oil. This food-grade oil will protect your cutting surface and won’t spoil. Other suitable treatments include coconut oil, almond oil, walnut oil, or beeswax. Coconut, almond and walnut oils are all highly resistant to rancidity. More common cooking oils like olive or vegetable oil are not recommended for cutting surfaces due to their tendency to spoil — and who wants to cut their veggies on rancid oil?

Seasoning

To season your board, warm the oil and apply it with a soft cloth, following the direction of the wood grain. Don’t worry about applying too much oil — there is no such thing as “too much.” For the initial treatment, you’ll need to apply 4 or 5 coats, letting each coat dry for a minimum of 4 hours before applying the next.

Should you choose to go with beeswax as a sealant, simply apply the beeswax (on top of your mineral oil, ideally) then buff it off with a soft cloth. Alternatively, you can add 1/2tsp of beeswax to 1 cup of mineral oil, heat this in the microwave for 45 seconds, and then simply apply it as if it were an oil.

Following the initial seasoning, you’ll want to reapply a coat of oil every two weeks to keep your board in tip-top condition.

Cleaning

DOs: When it comes time to clean your board, rinse it with soap and warm water, drying it thoroughly afterwards.

To disinfect your plantation teak, wipe it down with undiluted white vinegar after each use. Vinegar is effective against E. coli, Salmonella, and Staphylococcus airtight plastic food container.

If you want to go a step further, you can wipe your board down with a 3% hydrogen peroxide solution, directly after wiping down the board with vinegar.

DON’T: When washing your board, don’t submerge the board underwater, for it’s porous surface can absorb water and cause cracking.

Category: plastic cutting board  Tags:  Comments off

The Benefits of Plastic Cutting Boards

Food preparation in the kitchen requires specific tools to make things easier, which accounts for the popularity of plastic cutting boards. Whether you are preparing hard to cut through meat or just simply chopping down green vegetables and the like, it would do you good to use kitchen utensil to help you with your task.

While most people have been used to seeing wooden boards on their kitchens, it is basically their plastic counterparts that provide an alternative to using these kitchen tools. As a relatively modest invention, these boards made of plastic will make slicing and cutting tasks in the kitchen easy with their beneficial features.

Because they are made of plastic, these cutting boards are considered to be very affordable. Being reasonably priced, one can just go ahead and buy two or three of these for specific food preparation functions. One should take note however, that plastic does not hold well when combined with sharp objects, so you should be prepared to risk them getting sliced and scarred.

plastic cutting board

This is a factor that makes some people turn their noses up on plastic cutting boards, as these scars are prone to harboring certain bacteria and the like. But the good thing that regular kitchen aficionados usually say about boards made of plastic is that they are very easy to clean. This holds true, as the surface of plastic is often non-porous, leaving no space for any meat or vegetable particles to soak through the material.

This makes sanitation of the plastic cutting board easy as one can use a disinfectant spray and just wipe it off clean. It also makes for easy cleaning with hot water and some dishwashing soap. They are also dishwasher friendly so popping one in with the dishes would make cleaning a breeze for anyone to do.

Of course, thorough cleaning should be done to ensure that no residue is left behind. Cooking food might leave you free of bacteria, however, there are certain vegetables, meat, or fish that can be consumed raw. If these raw foods had been sliced on plastic cutting boards which were not properly cleaned then it could make them unhealthy.

While these disadvantages derived from boards made of plastic are often considered to be health issues, the US Food and Drug Administration (FDA) has mandated commercial food service establishments to use plastic cutting boards in food preparation. The reason behind this is that sanitizing them is easier compared to cleaning the ones made of wood. Since wooden boards are made of porous material, they tend to absorb the residue coming from the prepared food. This makes it difficult to effectively clean out, particularly certain residue that have already soaked into the material.

For those who also want something that can work homogeneously with their kitchens, cutting boards made from plastic will definitely be a good choice. As plastic is easily moldable, you can get plastic boards in different shapes and sizes, as well as colors, making them easy to match with your kitchen and other utensils. Click on the links below for a great deal on your next plastic cutting board.

Category: plastic cutting board  Tags: ,  Comments off